Grease Interceptor pumping IN CHICAGO

Chicago Grease Interceptor Pumping

Grease Interceptor Pumping Services in Chicago

Chicago, Illinois, is famous for having a vast number of some of the best food service establishments. This means that grease interceptor companies have the perfect opportunity to step up and provide these food establishments with peace of mind by servicing their waste grease systems. Chicago Grease Interceptor Pumping has managed to establish a top-tier reputation for being the best in Illinois.

Can you imagine how Chicago would look without grease interceptors and other related equipment? It would be a complete mess! The city’s sewage system would eventually get chocked by thousands of gallons of waste food solids, insoluble grease, waste fat, and oil flooding the system every day. After a short while, the sewage system would clog and grind to a halt. Luckily, that’s not going to happen. Thanks to some clever engineering, grease interceptors trap these contaminants, preventing them from reaching the sewer system. This is why the law requires installing grease traps to protect the city’s sewers.

How to schedule maintenance for your grease trap

How often should I schedule maintenance to keep my grease trap working correctly and to comply with the laws?

Local authorities do not joke around when it comes to preventing oil, grease, and solid food waste from getting into the sewage system. Any blockage resulting from oil spills or any of the mentioned contaminants is almost definitely followed by hefty fines and sometimes even closure until compliance is met. Of course, if your restaurant caters to vegans, the time spent between cleanings will substantially increase.

Due to these differences, your restaurant could need monthly grease trap cleaning and pumping, especially if you make food using a lot of greases and oil. However, if you rarely use oil or grease to prepare food, you may just need to schedule a grease trap pumping twice a year. A majority of jurisdictions require that all containment tanks should never go beyond a 30% capacity. So, to stay safe, pump and clean your grease interceptor when it reaches 25%.

The “25%” factor

When the grease containment tank reaches a capacity of 30%, there is often an increased risk of a hazardous overflow of oil, solid food waste, and grease into the environment or the sewer system. For this reason, a 25% industry standard was set to reduce the probability of such an event happening. Pumping your grease trap before reaching the 30% threshold is an essential safety requirement to prevent future grease interceptor problems.

Try always to remember the “25%” factor. Because even in humongous tanks, the 25% factor still applies, at least when it comes to Chicago’s health inspectors. They won’t hesitate to issue penalties and fines the moment your tank exceeds 30%.

How often should I schedule for my small indoor grease trap?

It depends on the size of your grease trap. Many restaurants use indoor grease traps. You will need to pump indoor grease traps more often than outdoor grease interceptor tanks. Local neighborhood establishments often use small indoor grease traps of five to fifty gallons. Due to indoor traps’ low capacity compared to the massive size of the outdoor grease interceptors, indoor traps should be scheduled for cleaning and pumping at least once a month, if not sooner.

How often should I schedule for underground grease interceptors located outside?

If you have a large restaurant, you know that it doesn’t make sense to install a grease interceptor of 750 to 5000 gallons indoors. That’s why large food establishments choose to install grease trap tanks outdoors. This also creates room for more massive tanks and sophisticated plumbing. Many establishments will opt to install these tanks somewhere under a sidewalk or parking lot. While initial installation can be quite costly in terms of time and money, you’ll save a lot on maintenance. These large grease trap interceptors need servicing only two or four times a year.

My Chicago grease trap or interceptor is not working properly

Are you having an issue with your grease trap or interceptor? Don’t panic, let our experienced grease trap cleaning and pumping experts solve your problem for you.

Our hydro jet cleaning service!

During installation, the grease trap is usually clean and free-flowing. Therefore, soon after installation, hiring a grease tank cleaning service works like magic in getting the tank back to its optimum operating condition. However, in time, grease and oil deposits build up at the bottom, on the sides, and even in drainage and intake plumbing. As a result, there’s an increase in the frequency of blockages. Eventually, you could have hazardous and expensive overflows, which cannot be rectified by basic pumping.

We want to introduce you to our top-tier hydro jet cleaning system! With our state-of-the-art hydro jet cleaning system, we use massive water pressure of up to 3500 PSI, to blast away any thick or sticky deposits in the tank. When you schedule regular hydro jet cleaning services with us, you can rest assured that your grease interceptor will always achieve optimum performance!

Back to home